1. Structure
The structure of the reaction kettle is basically the same. In addition to the reaction kettle, there are also transmission devices, stirring and heating (or cooling) devices, etc., which can improve the heat transfer conditions, control the reaction temperature more uniformly, and do not strengthen the mass transfer process.
A storage tank, as the name suggests, is a welded tank. Generally speaking, the storage tank should have high airtightness and strong corrosion resistance, which puts forward higher requirements on the manufacturing technology and welding process of the storage tank. So, what is the welding process of the storage tank? Let's find out together.
As we all know, there are many kinds of welding processes, and the welding quality of each is also good. However, in the production of storage tanks, argon arc welding is mostly used, and it is generally welded by hand. In argon arc welding, we need to use small current, fast welding speed, short arc narrow pass welding, and control the temperature between the control layers to be below 100 degrees. Of course, the welding materials used should also be matched, otherwise it will affect the welding. Effect.
2. Operating pressure
The operating pressure of the reactor is relatively high. The pressure in the kettle is generated by chemical reaction or formed by temperature increase, the pressure fluctuates greatly, sometimes the operation is unstable, and the sudden pressure rise may exceed several times the normal pressure. Therefore, most of the reactors are pressurized vessels.